NOTE: These steps are only required for IEI Mustang-V100-MX8-R10 card. IEI Mustang-V100-MX8-R11 card doesn't require any additional steps and it's completely configured using the general guidance.
The IEI Mustang-V100-MX8 is an OEM version of the Intel® Vision Accelerator Design with Intel® Movidius™ VPUs. This guide assumes you have installed the Mustang-V100-MX8 and the Intel® Distribution of OpenVINO™ Toolkit.
Instructions in this guide for configuring your accelerator include:
NOTE: This guide does not apply to Uzel* cards.
Using the IEI Mustang-V100-MX8 requires downloading and installing the most current software for your system.
Visit the IEI Download Center for the most current software and documentation. Search for Mustang-V100-MX8.
Download the appropriate software for your system, decompress the downloaded archive, enter the newly created directory, and run the install script:
sudo, or as
On Windows*, do one of the following:
hddldaemon is a system service, a binary executable that is run to manage the computational workload on the board. It is a required abstraction layer that handles inference, graphics processing, and any type of computation that should be run on the video processing units (VPUs). Depending on the board configuration, there can be 8 or 16 VPUs.
NOTE: Graphics and other specialized processing may require some custom development.
<IE> refers to the following default OpenVINO™ Inference Engine directories:
If you have installed OpenVINO™ in a different directory on your system, you will need to enter your unique directory path.
Below are some possible configuration options.
NOTE: After changing a configuration file, the
hddldaemonmust be restarted.
Changes the output of the
hddldaemon to display a table with individual VPU statistics.
table setting presents labels on the left for each column and is recommended as easier to read.
tape setting prints the labels in each column.
Restricts the service to group members.
Recommended setting depends on your unique system configuration.
hddldaemon may be restricted to a privileged group of users. The appropriate group will vary according to the local system configuration.
Supported Settings: Valid groups on the current system. The
"users" group is a default group that exists on Windows and most Linux distributions.
Optional Recommended Settings:
"device_utilization" : "off"
This setting displays the percent of time each VPU is in use. It appears in the
table column when turned on, or if
"device_fps" is turned on.
"memory_usage" : "off"
This setting reports the amount of memory being used by each VPU.
Requires the squeeze scheduler. This setting might speed up performance significantly, depending on the app.
NOTE: This setting works in conjunction with:
"client_fps" : "off"
This setting reports the total FPS for the dispatching hddl_service (which will have one or more clients per app).