Benchmark C++ Tool

This topic demonstrates how to use the Benchmark C++ Tool to estimate deep learning inference performance on supported devices. Performance can be measured for two inference modes: synchronous (latency-oriented) and asynchronous (throughput-oriented).

NOTE: This topic describes usage of C++ implementation of the Benchmark Tool. For the Python* implementation, refer to Benchmark Python* Tool.

How It Works

Upon start-up, the application reads command-line parameters and loads a network and images/binary files to the Inference Engine plugin, which is chosen depending on a specified device. The number of infer requests and execution approach depend on the mode defined with the -api command-line parameter.

NOTE: By default, Inference Engine samples, tools and demos expect input with BGR channels order. If you trained your model to work with RGB order, you need to manually rearrange the default channels order in the sample or demo application or reconvert your model using the Model Optimizer tool with --reverse_input_channels argument specified. For more information about the argument, refer to When to Reverse Input Channels section of Converting a Model Using General Conversion Parameters.

If you run the application in the synchronous mode, it creates one infer request and executes the Infer method. If you run the application in the asynchronous mode, it creates as many infer requests as specified in the -nireq command-line parameter and executes the StartAsync method for each of them. If -nireq is not set, the application will use the default value for specified device.

A number of execution steps is defined by one of the following parameters:

During the execution, the application collects latency for each executed infer request.

Reported latency value is calculated as a median value of all collected latencies. Reported throughput value is reported in frames per second (FPS) and calculated as a derivative from:

Throughput value also depends on batch size.

The application also collects per-layer Performance Measurement (PM) counters for each executed infer request if you enable statistics dumping by setting the -report_type parameter to one of the possible values:

Depending on the type, the report is stored to benchmark_no_counters_report.csv, benchmark_average_counters_report.csv, or benchmark_detailed_counters_report.csv file located in the path specified in -report_folder.

The application also saves executable graph information serialized to a XML file if you specify a path to it with the -exec_graph_path parameter.

Run the Tool

Notice that the benchmark_app usually produces optimal performance for any device out of the box.

So in most cases you don't need to play the app options explicitly and the plain device name is enough, for example, for CPU:

./benchmark_app -m <model> -i <input> -d CPU

But it is still may be non-optimal for some cases, especially for very small networks. More details can read in Introduction to Performance Topics.

As explained in the Introduction to Performance Topics section, for all devices, including new MULTI device it is preferable to use the FP16 IR for the model. Also if latency of the CPU inference on the multi-socket machines is of concern, please refer to the same Introduction to Performance Topics document.

Running the application with the -h option yields the following usage message:

./benchmark_app -h
InferenceEngine:
API version ............ <version>
Build .................. <number>
[ INFO ] Parsing input parameters
benchmark_app [OPTION]
Options:
-h, --help Print a usage message
-i "<path>" Optional. Path to a folder with images and/or binaries or to specific image or binary file.
-m "<path>" Required. Path to an .xml file with a trained model.
-d "<device>" Optional. Specify a target device to infer on (the list of available devices is shown below). Default value is CPU.
Use "-d HETERO:<comma-separated_devices_list>" format to specify HETERO plugin.
Use "-d MULTI:<comma-separated_devices_list>" format to specify MULTI plugin.
The application looks for a suitable plugin for the specified device.
-l "<absolute_path>" Required for CPU custom layers. Absolute path to a shared library with the kernels implementations.
Or
-c "<absolute_path>" Required for GPU custom kernels. Absolute path to an .xml file with the kernels description.
-api "<sync/async>" Optional. Enable Sync/Async API. Default value is "async".
-niter "<integer>" Optional. Number of iterations. If not specified, the number of iterations is calculated depending on a device.
-nireq "<integer>" Optional. Number of infer requests. Default value is determined automatically for a device.
-b "<integer>" Optional. Batch size value. If not specified, the batch size value is determined from Intermediate Representation.
-stream_output Optional. Print progress as a plain text. When specified, an interactive progress bar is replaced with a multiline output.
-t Optional. Time in seconds to execute topology.
-progress Optional. Show progress bar (can affect performance measurement). Default values is "false".
CPU-specific performance options:
-nstreams "<integer>" Optional. Number of streams to use for inference on the CPU or/and GPU in throughput mode
(for HETERO and MULTI device cases use format <device1>:<nstreams1>,<device2>:<nstreams2> or just <nstreams>).
Default value is determined automatically for a device.
Please note that although the automatic selection usually provides a reasonable performance,
it still may be non-optimal for some cases, especially for very small networks.
-nthreads "<integer>" Optional. Number of threads to use for inference on the CPU (including HETERO and MULTI cases).
-pin "YES"/"NUMA"/"NO" Optional. Enable threads->cores ("YES", default), threads->(NUMA)nodes ("NUMA") or completely disable ("NO")
CPU threads pinning for CPU-involved inference.
Statistics dumping options:
-report_type "<type>" Optional. Enable collecting statistics report. "no_counters" report contains configuration options specified, resulting FPS and latency. "average_counters" report extends "no_counters" report and additionally includes average PM counters values for each layer from the network. "detailed_counters" report extends "average_counters" report and additionally includes per-layer PM counters and latency for each executed infer request.
-report_folder Optional. Path to a folder where statistics report is stored.
-exec_graph_path Optional. Path to a file where to store executable graph information serialized.
-pc Optional. Report performance counters.

Running the application with the empty list of options yields the usage message given above and an error message.

Application supports topologies with one or more inputs. If a topology is not data sensitive, you can skip the input parameter. In this case, inputs are filled with random values. If a model has only image input(s), please a provide folder with images or a path to an image as input. If a model has some specific input(s) (not images), please prepare a binary file(s), which is filled with data of appropriate precision and provide a path to them as input. If a model has mixed input types, input folder should contain all required files. Image inputs are filled with image files one by one. Binary inputs are filled with binary inputs one by one.

To run the tool, you can use public or Intel's pre-trained models. To download the models, use the OpenVINO Model Downloader or go to https://download.01.org/opencv/.

NOTE: Before running the tool with a trained model, make sure the model is converted to the Inference Engine format (*.xml + *.bin) using the Model Optimizer tool.

Examples of Running the Tool

This section provides step-by-step instructions on how to run the Benchmark Tool with the googlenet-v1 public model on CPU or FPGA devices. As an input, the car.png file from the <INSTALL_DIR>/deployment_tools/demo/ directory is used.

NOTE: The Internet access is required to execute the following steps successfully. If you have access to the Internet through the proxy server only, please make sure that it is configured in your OS environment.

  1. Download the model. Go to the the Model Downloader directory and run the downloader.py script with specifying the model name and directory to download the model to:
    cd <INSTAL_DIR>/deployment_tools/open_model_zoo/tools/downloader
    python3 downloader.py --name googlenet-v1 -o <models_dir>
  2. Convert the model to the Inference Engine IR format. Go to the Model Optimizer directory and run the mo.py script with specifying the path to the model, model format (which must be FP32 for CPU and FPG) and output directory to generate the IR files:
    cd <INSTALL_DIR>/deployment_tools/model_optimizer
    python3 mo.py --input_model <models_dir>/public/googlenet-v1/googlenet-v1.caffemodel --data_type FP32 --output_dir <ir_dir>
  3. Run the tool with specifying the <INSTALL_DIR>/deployment_tools/demo/car.png file as an input image, the IR of the googlenet-v1 model and a device to perform inference on. The following commands demonstrate running the Benchmark Tool in the asynchronous mode on CPU and FPGA devices:
    • On CPU:
      ./benchmark_app -m <ir_dir>/googlenet-v1.xml -d CPU -api async -i <INSTALL_DIR>/deployment_tools/demo/car.png --progress true
    • On FPGA:
      ./benchmark_app -m <ir_dir>/googlenet-v1.xml -d HETERO:FPGA,CPU -api async -i <INSTALL_DIR>/deployment_tools/demo/car.png --progress true

The application outputs the number of executed iterations, total duration of execution, latency and throughput. Additionally, if you set the -report_type parameter, the application outputs statistics report. If you set the -pc parameter, the application outputs performance counters. If you set -exec_graph_path, the application reports executable graph information serialized. All measurements including per-layer PM counters are reported in milliseconds.

Below are fragments of sample output for CPU and FPGA devices:

See Also